Medical
When developing our deconex® cleaning agents and disinfectants, we put thorough testing of performance, effect and material compatibility at the top of the list. To ensure our products are ready to market, we work in close cooperation with recognised test laboratories and with manufacturers of medical products. External tests are supplemented with in-house test methods so you can rely on products that are based on experimental evidence. This gives you the reliability you want for every application.
You can find exciting studies, articles and reference reports here.
Here you will find brochures, safety data sheets and user information on our products.
Manual reprocessing
Automatic reprocessing
Mildly alkaline-enzymatic pre-cleaning foam
For pretreatment of surgical instruments
Manual reprocessing
Although automated processes have already become established in practice in many countries, the use of manual products cannot be dispensed with: for example, operating theatre instruments are now protected from corrosion and pre-cleaned using foam products prior to long periods of storage. Endoscopes are always subjected to coarse and brush cleaning with appropriate manual products. However, the manual final disinfection of non-critical medical devices or the use of cleansing disinfectants is also standard in many areas.
However you clean manually: the products in our deconex® range comply with the latest scientific findings as well as legal requirements and standards.
Endoscopes
Flexible endoscopes are among the medical devices that have been shown to be most likely to be contaminated with impurities and micro-organisms. Cleaning is therefore a crucial factor in the entire treatment cycle, especially the efficient removal of biofilms.
Our enzymatic detergents and disinfectants dissolve and remove not only blood but also impurities such as fats and carbohydrates. The formulations are tested according to the latest standards such as DIN EN ISO 17111. This ensures maximum safety for patients and staff.
Here you will find brochures, safety data sheets as well as user information on the products and services we offer for manual reprocessing.
Automatic reprocessing
Automated instrument reprocessing has become more and more demanding in recent years. Complex instruments, sometimes made of a mix of materials, a wide variety of contaminants and long service lives demand reprocessing products with the highest standards.
Whichever products from our full range you use: our cleaners, neutralisers, rinse aids, disinfectants and care products deliver hygienic safety, material compatibility, economy and sustainability. From these first-class products, we develop automated treatment processes for you that are 100% tailored to your needs:
Endoscopes
The reprocessing of flexible endoscopes is a particular challenge due to their construction and contamination by impurities and micro-organisms. After manual cleaning, automated processes should be preferred.
In addition to high material compatibility, our deconex® cleaners and disinfectants deliver certified, comprehensive effectiveness according to DIN EN ISO 15883-4. In this way, patients, users and third parties are comprehensively protected.
Bedpans
Bedpans and urine bottles are non-critical or semi-critical medical devices. The gold standard of reprocessing is thermal processes, which are subject to the normative requirements of DIN EN ISO 15883-3. Depending on the type of appliance, limescale inhibitors/rinse aids as well as an additional cleaner must be used for reprocessing and value conservation.
Our products offer you a variety of benefits: from proven cleaning power, rinsing power and descaling power to excellent material compatibility.
Beds / containers
One trend in the reprocessing of bed frames is the use in decontamination systems, which can also be used for transport trolleys, containers, operating tables and furniture as well as operating theatre shoes.
Our cleaners are specially designed for thermolabile products with a lot of electronics, such as bedsteads. They have a high level of material compatibility and effectiveness.
Here you will find brochures, safety data sheets and user information on the products and services we offer for automated reprocessing.
Application Tools
Chemistry delivery systems provide a reliable supply for machine-integrated dosing devices in washer-disinfectors (RDG/RDG-E).
Rely on the experience of our technical experts when planning and implementing a new chemistry delivery system tailored to your needs.
Dosing devices
Dosing devices enable the withdrawal of precisely dosed working solutions of instrument and surface products. The robust and compact design guarantees trouble-free use in numerous areas. The devices also meet the requirements of the Robert Koch Institute and the Commission for Hospital Hygiene and Infection Prevention and have been type-tested by an external accredited laboratory.
Find out more about our accessoires.
Our services
Support from A to Z: in addition to an extensive range of manual and automated deconex® products for instrument reprocessing, we also offer our customers a wide range of services - from status quo analysis to derouging and training.
Status quo analysis
Process development and process optimisation
Basic cleaning / Deep cleaning
Derouging
Training courses & seminars
We pass on our knowledge to you: In the training courses and seminars of the Borer Cleaning Academy, we bring your know-how regarding the reprocessing of medical devices up to date. Our practice-oriented courses are held in the Borer Competence Center with integrated technical center. The aim is to actively support you in achieving best-in-class reprocessing of medical devices.
Do you have any questions about our products and services? Contact us!
Your advanced cleaning solution experts
Regional sales partners worldwide
The worldwide use of our products requires a well-developed distribution system. With main agencies in over 60 countries, we guarantee direct customer contact and reliable delivery dates. Our sales partners support our customers worldwide with targeted, industry-specific training in the best possible application of our cleaning products and thus bring Borer expertise right to the user.
Representative Medical
In Vitro Technologies Pty. Ltd.
7-9 Summit Road
3174 Noble Park, Melbourne, VIC
Australia
- +61 3 9771 3700
- +61 3 9771 3720
- info@invitro.com.au
Representative Medical
Medtradex bvba
Vriendschapsstraat 30
3090 Overijse
Belgium
- +32 27 69 70 00
- +32 27 68 12 46
- ivo.schapdryver@medtradex.com
Representative Medical
Medical Technics Eng. Ltd.
Mladost 1, bl. 28 B, Dimitar Mollov Str.
1750 Sofia
Bulgaria
- +359 2 971 2845
- +359 2 971 1214
- kostov@mte-bg.com
Representative Medical
International Clinics S.A.
Av. del Valle sur 601
Piso 4 Ciudad Empresarial
Chile
- +56 2 2472 7200
- +56 2 2472 7296
- msimpson@iclinics.cl
Representative Medical
Borer Chemie (Shanghai) Ltd
Suite 801, Changhang Building
No. 800 ZhangYang Road
200122 Pudong Dist. Shanghai
China
- +86 21 5836 6216
- +86 21 5836 6213
- office.china@borer.ch
Representative Medical
Borer Chemie Deutschland GmbH
Lützeltaler Straße 363868 Großwallstadt
Germany
- +49 6022 26557-0
- +49 6022 26557-21
- office@borerchemie.de
Representative Medical
Steelco Nordic A/S
Lottenborgvej 26
2800 Kgs. Lyngby
Denmark
Representative Medical
Electrolab Medic
Calle San Antonio Abad y
Calle Gabriela Mistral
San Salvador
- +503 22399905
- +503 22354443
- andres.bustillo@electrolabmedic.com.sv
Representative Medical
Steelco Nordic A/S
Lottenborgvej 26
2800 Kgs. Lyngby
Denmark
Representative Medical
Symbiose Environnement SARL
Le Carrefour
53810 CHANGÉ
France
- +33 2 43 49 75 55
- +33 2 43 49 75 56
- contact@symbiose-environnement.com
Representative Medical
Sodel
190 rue Rene Barthelemy
14104 Lisieux Cedex
France
- +33 231 31 10 50
- +33 231 31 80 60
- frederic.leautey@sodel-sa.eu
Representative Medical
DIMEX MEDICA S.A. de C.V.
Barrio San Felipe No. 3002Atras de la Iglesia Medalla Milagrosa
11101 Tegucigalpa
Honduras
Representative Medical
Kiwi Medical Supplies
D-02, Regency Plaza Business ParkNear Valdhuni Bridge, Ulhasnagar
421003 Maharashtra
India
Representative Medical
PT. Lima Dispo Selaras
Jl. Pulo Ribung Raya Blok AR1 / 63
Jakasetia
17147 Bekasi Selatan
Indonesia
- +6221 2957 1196
- +6221 8243 7409
- info@limadisposelaras.co.id
Representative Medical
Rockford Healthcare
Unit 3, The Westway Centre
Ballymount Avenue
Dublin 12
Ireland
Representative Medical
Ronly Technologies (1988) Ltd.
Hahayal Haalmoni 7a st.P.O. box 168
7510101 Rishon Lezion
Israel
- +972 3 969 6804
- +972 3 966 0955
- ronly@ronly.co.il
Representative Medical
BM Italia srl
Via Decio Raggi, 252° piano Int. 10
47121 Forli (FC)
Italy
- +0039 0543 33034
- +0039 0543 33912
- commerciale@bmitaliasrl.com
Representative Medical
NITI-ON CO., LTD.
2-12-4 Sakae-ChoFunabashi-Shi
273-0018 Chiba
Japan
- +81 47 431 1871
- +81 47 431 1878
- hiroshi@nition.co.jp
Representative Medical
OST-FARM LLP.
16A Astana Street070003 Ust-Kamenogorsk
Kazakhstan
Representative Medical
FLOMED
Str. "Velania" 2/7 Nr. 63
10000 Prishtina
Kosovo
- +381 38 516064
- +381 38 516064
- granitbruci@hotmail.com
Representative Medical
Société MAXIMED SARL
Sami Solh Avenue
Azarieh Bldg - 3rd florr
Beirut
Lebanon
Representative Medical
REINTECH SDN BHD
No. 75, Jalan SP 3/4
Taman Saujana Puchong
47110 Puchong, Selangor
Malaysia
- +60 3 8069 1036/1038
- +60 3 8069 1039
- info@reintech-my.com
Representative Medical
In Vitro Technologies NZ Pty Ltd.
PO Box 14-323Panmure
Auckland
New Zealand
- +64 9 573 0770
- +64 9 573 0711
- infonz@invitro.co.nz
Representative Medical
Buhler Pharma, S.A.
Carretera Norte, km 2.5
Managua
Nicaragua
Representative Medical
BM Commerce
Ruzveltova 63a1000 Skopje
North Macedonia
- +389 2 306 7070
- +389 2 306 7071
- vesnatasevska@t-home.mk
Representative Medical
Steelco Nordic A/S
Lottenborgvej 26
2800 Kgs. Lyngby
Denmark
Representative Medical
Borer Chemie Deutschland GmbH
Lützeltaler Straße 363868 Großwallstadt
Germany
- +49 6022 26557-0
- +49 6022 26557-21
- office@borerchemie.de
Representative Medical
Total Technologies Pvt. Limited
696 J-2, Johar Town54590 Lahore
Pakistan
- +92 (0)42 35957281-3
- +92 (0)42 35957284
- info@totalgroup.com.pk
Representative Medical
Dynamed Healthcare Incorporated
42 Tomas Morato Avenue
3rd Floor Metrofocus Bldg.
1112 Quezon City
Philippines
- +63 243 7916
- +63 252 5037
- deshtinehazel@dynamedhealthcare.com
Representative Medical
Balkan Medical Distribution
Str. Moinesti nr. 4
Bl. 136, sc1, et.2, ap 13, Sector 6
061233 Bucuresti
Romania
- +40748 293 481
- +40 372 930912
- balkanmedical@gmail.com
Representative Medical
Topchemie medlab d.o.o.
Zmaj Ognjenog Vuka 211000 Belgrad
Serbia
- +381 1136 90 190
- +381 11 40 93 228
- office@topchemie.com
Representative Medical
Neu Industries Pte Ltd
132 Joo Seng Road #04-01
368358 Singapore
- +65 3152 0208
- +65 6636 9813
- sales@neuindustries.com
Representative Medical
MUDITIS s.r.o.
Korenského 1107/1515000 Praha
Czech Republic
- +420 724 505 063
- +420 602 486 326
- info@muditis.cz
Representative Medical
Meditrade d.o.o.
Brnčičeva 17b
SI-1231 Ljubljana-Črnuče
Slowenia
- +386 1 5854 600
- +386 1 5445 401
- marko.schulz@meditrade.si
Representative Medical
Antonio Matachana, S.A.
Almogávares, 174-17608018 Barcelona
Spain
- +34 933 008 012
- +34 933 005 924
- elorenzo@matachana.com
Representative Medical
MeDent Professional Co., Ltd.
3F Samduk Bldg. 413-20, Sungnae-dongKangdong-gu
Seoul
South Korea
- +82 2 484 88 18
- +82 2 484 88 28
- m-professional@hanmail.net
Representative Medical
DKSH Taiwan Ltd.
10F., No. 22, Lane 407, Tiding Blvd.,Sec. 2, Neihu Technology Park,
114 Taipei
Taiwan R.O.C
- +886 2 8752 6666
- +886 2 8751 8688
- silvia.wang@dksh.com
Representative Medical
NAMWIWAT ENGINEERING (1992) CO. LTD
999/3-5 Moo 9 Prachauthit_Kusang RdNaiklongbangplakod, Phrasamutjeydee
10290 Samutprakarn
Thailand
- +662 461 7287 106
- +662 461 7200
- marketing@namwiwat.com
Representative Medical
MUDITIS s.r.o.
Korenského 1107/1515000 Praha 5
Czech Republic
- +420 724 505 063
- +420 602 486 326
- info@muditis.cz
Representative Medical
Farmakim
Tekstikent A24
Blok No 11
34235 Esenler Istanbul
Turkey
Representative Medical
Steelco Hungary Kft
Temesvar u. 19-21
1116 Budapest
Hungary
- +36 1 371 0257
- +36 1 371 0258
- steelco@t-online.hu
Representative Medical
Kiwi Medical Supplies LLC
12, The Bridge BuildingTown Center
15890 Al Ain
United Arab Emirates
Representative Medical
Duong Gia Trading Co., Ltd
No. 4, Alley 343/10 Doi Can Street
Lieu Giai ward, Ba Dinh District
Hanoi city
Representative Medical
Medic plan
A. Panagouli 70
153 43 Agia Paraskevi
Greece
Representative Medical
AS Semetron
Kotka 26
11312 Tallinn
Estonia
Online Magazin
Ausbildung zur FMA
Die Veranstaltung begann mit einem Überblick über die Aus-, Fort- und...
Was sind die aktuellen Trends und Herausforderungen in Bezug auf High-Purity-Reinigungslösungen in...
Wiederverwendung von Einmalprodukten
Im Rahmen von Nachhaltigkeitsanforderungen und beschränkter...
In der Teilereinigung mit höchsten Reinheitsstandards und insbesondere bei Vakuumverfahren kommt es...
Der sichere Umgang mit Reinigern und die Arbeitssicherheit im Fokus
Im Umgang mit...
Was ist Rouge?
Rouge ist eine Form von Oberflächenkorrosion die sich durch eine...
Das Organisationsteam der Borer Chemie Deutschland GmbH, bestehend aus Dagmar Martini, Marion...
In diesem Jahr durften wir eine Vielzahl von Teilnehmern aus Krankenhäusern, Praxen, Laboren,...
Viele AEMP sehen sich mit der Herausforderung konfrontiert, die hohen Anforderungen an die...
Warum sind Phosphate so beliebt?
Phosphate sind aufgrund ihrer multifunktionalen Wirkung äusserst...
Die Sicherstellung der definierten Sauberkeit von Laborutensilien ist eine der wichtigsten...
Bei der Herstellung von Instrumenten fehlt zunächst eine schützende Passivschicht, die sich erst...
Übergänge aus Glas bei Vakuumlinien oder Glasapparaturen sind grundsätzlich durchlässig. Für...
Download Center
Product brochures, product data sheets and user information on our products and services are available for download here.
Trade fairs, events & congresses
Here you will find an overview of all national and international trade fairs in which we or our sales partners participate.
Another way to get to know us and our products and services is through our training courses and seminars.